jwbs-18bandsaw

"It''s absolutely routine," says Platteville, Wisconsin, realtor Dean Ferris. "On some occasions, the inspection may find a buried fuel tank that must be removed or fuel leaks and spills that must be cleaned up. At that point, these problems can be expensive, or they can threaten the property transfer. It''s far better to clean them up ahead of time and install the equipment to prevent further leaks or spills."The typical sign of minor contamination on most farms is petroleum-stained soils and a lack of vegetation around storage tanks. Recently, the options for cleaning up these situations have improved.

Wheel sizes range from 4 X 2 in. to 8 X 2 in. with a choice of roller, Delrin, or precision ball bearings. Typical applications include automotive plants, tire plants, food processing, floor scrubbing equipment, and aircraft/aerospace plants. Swivel nylon casters feature thermoplastic rubber tires bonded to a polypropylene wheel center. Double-sealed precision ball bearings in the swivel head and wheel hub deliver smooth operation. The casters withstand corrosion and temperatures to 230[degrees]F. They are available in wheel diameters of 100, 125, 150, and 200 mm with load capacities from 100 to 130 kg. They can be ordered with bolt holes, threaded stems, fittings for round or square tubes, fixed pins or plate mountings, and with or without brakes. A line of electrically conductive nylon casters is also available.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.

©2003 www.band-saws-for-sale.com. All rights reserved.