daytonbandsaws

Circle 108 on inquiry card This duct liner offers a high level acoustic and thermal resistance. It meets thermal performance requirements of many of the most stringent local and state energy codes, including Title 24 of the California Building Standards Code. An encapsulant edge coating covers fibers and prevents flaring of the insulation at the edges (an important IAQ concern with internal duct linings). The airstream surface is treated with an anti-microbial agent to prevent the growth of fungi and bacteria. Knauf. Circle 109 on inquiry card The Wind Guard air curtain is a fixed-speed, belt-driven unit that produces large volumes of air at low operating sound pressure levels. Primary applications are over doors 14-ft. to 26-ft. in height. It can successfully repel gusts of wind up to 30 mph. Heated and unheated models are available, with heated models available in gas, electric, steam and hot water coil designs. Mars Air Doors.

I''d like to begin the new year with a discussion of the basics of a diesel fuel system with an in-line pump and follow up in February with the distributor type pump system. As you know, all diesel systems have a fuel tank, one fuel filter (possibly more depending on the installation), a transfer pump, a high-pressure fuel-injection pump, high pressure fuel lines, low-pressure fuel lines, injector nozzles, and sometimes return (fuel overflow) lines. Figure 1 represents a typical diesel fuel system.

Though light in weight, Airbor magnetic drill has a powerful 1.6-hp air motor and 1,600-lb magnetic holding strength. With its extra rack, stroke length is extended to 10 1/4 in. Annular cutter capacity is up to 2 1/16 in. diam. Geared chuck adapter converts the unit to a standard drill press. The Slugger Air Force pneumatic drill, at 24 lbs, 6 1/4" high, is useful for confined area drilling. The drill''s features include a permanent magnet that turns on or off by air power, a cutter capacity of up to 1 1/16" diameter x 3/4" depth and the ability to use ShortSlugger cutters and frame cutters. These cutters'' geometry allows the operator to drill multi-layered truck frames in a single pass.

©2003 www.band-saws-for-sale.com. All rights reserved.